Specs for Microsoft’s Pink phone leaked

ZDNet have stumbled upon a list of specs and shared with us. The specifications allegedly are for “the Windows Mobile 7 Chassis 1”  and  Chassis 1 is the heart of the rumored Microsoft Pink project .

Microsoft repetitively rejects the rumor about a “Zune” phone that the company will exclusively has the control of the hardware but Microsoft never denies about this Pink project, which also recently rumored to be subject of discussion between Microsoft and Verizon. 

Core requirements:

• Processor: ARM v6+, L2 Cache, VFP, Open GL ES 2.0 graphics HW (examples: QCOM 8k, Nvidia AP15/16, TI 3430)
• Memory: 256MB+ DRAM, 1G+ Flash (at least 512MB fast flash – 5MB/s unbuffered read @4K block size)
• Display:  WVGA (800 × 480) or FWVGA (854 × 480) 3.5” or greater diagonal
• Touch: Multi-touch required
• Battery: Sufficient to meet Days of Use LTK requirements.
• Controls: Start, Back, Send and End are required (soft controls allowed as long as they are always present).

Peripherals:

• Camera: 3MP+, flash optional, 2nd camera optional (VGA resolution sufficient)
  GPS: aGPS required
• Sensors required: Light Sensor, Compass (3 axis, 5 degrees, 100 Hz sample rate), Accelerometer (3 axis, 2mg resolution, 100 Hz sample rate)
• USB: High speed required, 20 MB/s transfer rate.
• Bluetooth: BT2.1 required, must run MSFT BT stack, CSR BlueCore6 or later recommended.
• Wi-Fi: 802.11B/G required, must run MSFT Native Wi-Fi stack, Atheros 6002 or Broadcomm 4325 recommended.
• Connectors: Micro USB and 3.5mm Audio required.

Options:

• FM tuner:  If tuner HW is present it will be detected and supported by the Media application.
  Haptics
• SD Card (Micro SD recommended)
• DPAD, qwerty or 12/20 key keyboards all optional

[Via unwiredview]

Leave a comment

Name (required)

E-mail (required)

URI

Your Comment

Notify me of followup comments via e-mail