Best Digital Mixer for 2023

25-total-bus Digital Mixer with 16 Programmable Mic Preamps

17 Motized Faders

Virtual FX Rack

7" Col TFT

40-input

20 discrete channels (16 mono mic/line plus 2 stereo) offer up to 22 tracks of recording (up to 24-bit/96 kHz)

6 powered headphone outputs, each with a customizable, savable mix as well as a dedicated 7th output for the sound engineer

20 built-in effects with adjustable parameters that can be applied to any channel via two dedicated EFX busses

22-in/4-out USB audio interface mode lets you route inputs to DAW or streaming software, even while recording to an SD card

Wireless control via free iOS app and optional BTA-1 adapter

25-total-bus Digital Mixer with 32 Gain-Programmable Mic Preamps

25 Motized Faders

Virtual FX Rack

7" Col TFT

40-input

16-channel Digital Stereo Personal Monit Mixer f Use with Behringer Powerplay Distribution System

Tablet/PC/Smartphone Controlled Digital Mixer

Integrated Wi-Fi

Cross-platform compatibility with iOS, Android, Windows, Mac OS, and Linux devices

Use up to 10 control devices (tablets, phones, PCs) simultaneously

Legendary Harman Signal Processing from dbx, Digitech, and Lexicon.Real-Time Frequency Analyser (RTA) on inputs and outputs

22-Track simultaneous recording, 20-track playback

Mix, monitor, and record using an iPad

Main outputs, 6 customizable monitor outputs, and a dedicated output for FOH monitoring and mixing

Scene saving function, Up to 9 scenes saved at a time

20 built-in chorus, delay and reverb effects with adjustable parameters

12 discrete channels (8 mono plus 2 stereo) with XLR or 1/4-inch connectivity

Frequency characteristics 44.1 kHz:-1.0 dB: 20 Hz - 20 kHz,96 kHz: -3.0 dB: 20 Hz - 40 kHz.14 -track Simultaneous recording, 12-track playback

5 powered headphone outputs, each with a customizable and savable mix

14 -in/4-out USB audio interface connectivity

Scene saving function, up to 9 scenes saved at a time

12 Full Function Inputs: 4 Mic, 4 Mic/Line (XLR/TRS Combo), 2 Stereo line (TRS), USB 2-track

Outputs: 4 Aux (XLR), 1 Stereo (TRS), Main R/L (XLR), Cue/Monitor (TRS)

TRS Aux outs drive wired In Ear Monitors (IEM) directly. The TouchMix personal monitor app requires iOS 8 or higher

4-band full parametric EQ, variable high-pass and low-pass filters on all input channels

Gate and compressor on all input channels. Power Requirements- 42 W, 100 - 240 VAC, 50 - 60 Hz.Frequency Response- 20 Hz-20 kHz +/-0.5 dB, any input to any output

25-total-bus Digital Mixer with 16 Programmable Mic Preamps

5" Col TFT - Rackmountable

17 Motized Faders

Virtual FX Rack

40-input

16-channel mixer, 8 mono and 4 stereo line inputs with phantom power (+ 48V) and microphone preamplifier, 2 displays, MP3 , 16-channel mixer with usb mixer audio interface digital effects for PC streaming

Phantom power switch and PAD switch, G-MARK MG16MP3 studio mixer can use the condenser microphone larger frequency response and higher sound quality. The input channels with PAD switch adapt to various input signals picking up musical instruments to avoid clipping that can significantly affect mixing distortion.

Bluetooth mixer - Hassle and cable-free audio streaming ability directly to the console unit. This audio mixer can wirelessly stream music tunes from Android Smart Phone or PC with mixing board from Pandora or Spotify.

EQ and high-pass filter, precise tuning tone, the effective means is a reliable balance operation. The G-MARK MG16MP3 mixing console leverages the rich experience of audio equipment with a three-band equalizer on each mono channel, thus controlling the sound. The high-pass filter eliminates unneeded, low-frequency noise, resulting in a smooth, clear mix.

Audio interface mixer are rugged, impact-resistant powder coated metal chassis. Wavy rounded design facilitates rapid cooling, internal design, the power supply module independent of the analog circuit, which will help reduce the probability of noise, while increasing the life of internal components. Knob controller design all in the chassis surface, so from the chassis itself to the internal circuit board and the parts below, will not be any collision and extrusion.