Best Budget Plasma Cutter of 2023

CUT60 PILOT ARC 3 year warranty 7 day per week support in USA

PT60 blowback cutting torch WITH EURO CENTRAL CONNECTION

Blow-back start technology, Pilot Arc

60% duty cycle at 60amps, 110/220 with adapter

Continuous Pilot Arc enables you to cut expanded, rusted, painted metals

Plasma Cutter, 120V/240V 50A plasma cutter with IGBT inverter technology, long life and efficient higher than mosfet machine. IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting

Plasma cutting machine has current display function and air post time adjustment. Adjustment range is 2-20S, users can adjust the time for post air, effectively providing cooling,extend consumable's working life

Max cutting thickness 14mm ,10mm quality cutting thickness in [email protected] 50A; Under 120V, it is 35Amps.Quality cutting thickness is 8mm, Severance cutting thickness is 12mm

Accessories included:4M PT31 cutting torch, 2.5M Earth clamp,5pcs tips, 5pcs electrodes, 2 meters air hose, 4pcs hose clamp, 1adaptor(110V to 220V), 1 manual.Air regulator,air filter,air gauge are fixed at machine

The cutting machine can cut carbon steel, stainless steel, steel and other materials. It is an indispensable machine in your tool room

★ 𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: Efficiently cuts through rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.

★ 𝐒𝐚𝐟𝐞 & 𝐚𝐭 𝐋𝐨𝐰 𝐂𝐨𝐬𝐭: Newly Designed Upgraded torch and consumables ensure more precise cutting and durability of consumable life. Lower your usage cost. Compact plasma cutter has a handle for portability and use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.

★ 𝐒𝐞𝐭𝐮𝐩 𝐰𝐢𝐭𝐡𝐢𝐧 𝟏 𝐌𝐢𝐧𝐮𝐭𝐞: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quickly connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be set up quickly within 1 min.

★ 𝐎𝐮𝐭𝐩𝐮𝐭 & 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞: 10-50A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.

★ 𝐁𝐮𝐲 𝐰𝐢𝐭𝐡 𝐂𝐨𝐧𝐟𝐢𝐝𝐞𝐧𝐜𝐞: We offer a 𝟑𝟎 𝐝𝐚𝐲 𝐦𝐨𝐧𝐞𝐲-𝐛𝐚𝐜𝐤 𝐠𝐮𝐚𝐫𝐚𝐧𝐭𝐞𝐞, 𝐚 𝟏-𝐲𝐞𝐚𝐫 𝐍𝐞𝐰 𝐑𝐞𝐩𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 𝐚𝐧𝐝 𝐭𝐨𝐭𝐚𝐥 𝟑-𝐘𝐞𝐚𝐫 𝐥𝐢𝐦𝐢𝐭𝐞𝐝 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲, please submit warranty registration form on our website. 𝐎𝐮𝐫 𝐔𝐒𝐀-𝐛𝐚𝐬𝐞𝐝 customer service(via phone/email) is available to assist you.

★ 𝐏𝐚𝐜𝐤𝐚𝐠𝐞 𝐈𝐧𝐜𝐥𝐮𝐝𝐞𝐬: Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.

★ 𝐏𝐚𝐩𝐬𝐭 𝐀𝐝𝐯𝐚𝐧𝐜𝐞𝐝 𝐂𝐨𝐨𝐥𝐢𝐧𝐠 𝐒𝐲𝐬𝐭𝐞𝐦: ensures the plasma cutter has a stable and durable high performance.★ 𝐃𝐮𝐚𝐥 𝐕𝐨𝐥𝐭𝐚𝐠𝐞 𝐈𝐧𝐩𝐮𝐭: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).

50 Amp Digital Inverter Air Plasma Cutter

Automatic Dual Voltage / Dual Frequency (110/220V 50/60Hz)

PAPST Advanced German Cooling System

Max Severance Thickness: 3/4"

Max Cut Thickness: 1/2"

The pilot arc plasma cutter adopts a 50/60Hz high-frequency start and can arc without touching metal. 110/220V dual voltage digital display automatically identifies input current and voltage.

Plasma cutter at 220V 55A 60% Duty Cycle, the maximum cutting thickness is 16mm, and the quality cutting thickness is 12mm. Suitable for stainless steel, alloy steel, mild steel, and copper.

Plasma cutting machine built-in post flow, 2-15s time can be adjusted. Stop cutting and then cool plasma cutting torch consumables, dial display adjustment time, prolonged consumables life.

Plasma cutter adopts a digital design, pilot arc control is accurate and very smooth at 220V and 110V. Equipped with conversion wire (110V female to 220V male plug).

Air compressor regulator can be installed on the back panel of the plasma cutter to adjust the air pressure according to the thickness of the tool. 2T/4T can help you relax the fingers and work easily.

LIMITED TIME OFFER / COMES WITH BLOW BACK IPT-80 plasma torch

IGBT Infineon Modules / Inverter technology

80AMP Inverter Type cutter @ 60% duty cycle -- 5 Year (Parts and Labor)

IDEAL FOR REGULARLY CUTTING_A_MAXIMUM 1"

MAXIMUM CUT FOR QUALITY @ 10-12 IPM (STEEL) 1 1/4"

Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals

Adjustable post flow control up to 50 seconds to improve consumable and torch life

Over Current and Duty Cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved

Digital Air Pressure guide makes air pressure adjustment a no-brainer.

Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics

OUPUT: Current 20-60A Duty Cycle @ 40°C (104°F) 60% @60A 100% @40A

INPUT: Voltages 200-240V, 1-PH, 50/60Hz; Current 200-220V, 1-PH, 30A

CUT THICKNESS: Maximum: 1 1/4” MATERIAL; Ideal Cut Mild/Stainless Steel: 1”(25mm) @60A

INCLUDES: Power Supply;Cutting Torch;Consumables;Ground Clamp;Air Filter& Regulator;Connections

SUITABLE: For stainless steel, alloy steel, mild steel, copper and aluminum, etc.

【Non-Touch Pilot Arc Plasma Cutter】CUT50P has the function of Inverter technology high-frequency arc initiation（50/60HZ）, the cutting torch or cutting mouth doesn't need to touch the workpiece can achieve arc cutting, which is safer and not easy to damage the workpiece.

【Dual Voltage 110/220V】The cutting machine is designed for dual voltage 110/220V. There are two voltage lights on the front of the panel, the LED 110V is on when the machine is connected to 110V, and the LED 220V is on when the machine power is connected to 220V, which is convenient for users to read the machine voltage.

【Cutting Thickness】This plasma cutter easily cuts all metals especially stainless steel. ✨At 110V 32Amps, Max cutting thickness is 8mm#60PSI(0.6Mpa). ✨At 220V 35Amps, Max cutting thickness is 10mm#65PSI(0.65Mpa)

【Quality accessories】We only producing high quality machine and supplying quality accessories. 4 meters AG60 cutting torch coming with machine, earth clamp with 2 meters lead, 2 pcs torch electrodes, 2 pcs tip. 2 meters air hose, 1 set air regulator with air gauge. Machine comes with 110V power plug, also with 1 pc wire adaptor from 110V to 220V

[Widely Application and Low Cost] 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation.this Plasma Cutter available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel; widely used for automotive, ducting work, repair/maintenance,metal processing,manufacture

[SEE WHAT OUR CUSTOMER SAYS] I tried it on 120v with the air pressure turned way down on a piece of 1/8 angle iron the pilot arc worked as it should and it went through it like it wasn't even there. Next thing I tried it on was some roughly 3/8 wall tubing I needed to cut and notch for the safety cage on my figure 8 car.

[Generator Supported] This Plasma Cutting machine works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V,50A breaker for 110V

[Blowing Back] Pre-made 3 seconds of blowing time after you release the torch,to cool down the torch head and consumables.[110/220V Input ]Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz)

[Warranty] Buy this plasma cutter with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance

Occupational Health & Safety

Country of Manifacturer: United States

Manufacturer: Miller Electric

【 Pilot Arc Plasma Cutter】FC550DP has the function of Inverter technology high-frequency arc initiation（50/60HZ）, the cutting torch or cutting mouth doesn't need to touch the workpiece can achieve arc cutting, which is safer and not easy to damage the workpiece.

【Dual Voltage】: This plasma cutter designed under 115/230V, auto inspect indicate 115 and 230v, hand switch is not required on machine. There are two voltage lights at front of panel, 115V lighting when connect machine to power 115V, light 230V will lighting up when connect machine to power 230V, In this case the user easy knows the what kinds of voltage connecting machine

【Cutting Thickness】: this plasma cutter easily cut all metals especially stainless steel. Quality cutting thickness for steel is 10mm#65PSI(0.65Mpa) 230V 50Amps, Max cutting thickness 16mm#65PSI 230V 50Amps; Under 115V 35Amps, the quality cutting thickness is 8mm#60PSI(0.6Mpa) 115V Max cutting thickness is 10mm#60PSI(0.6Mpa) 115V. The current for this plasma cutting machine, 50Amps in 230V, and 35Amps in 115V.

【Quality accessories】: We only produce high-quality machines and supply quality accessories. 4meters AG60 cutting torch coming with the machine, earth clamp with 2 meters lead, 2 pcs torch electrodes, 2 pcs tip. 2 meters air hose, 1 set air regulator with air gauge. The machine comes with a 110V power plug, also with 1 pc wire adaptor from 110V to 220V plug.