Table Saw Fence in 2023

Table saw fence system fits a variety of saws

36-Inch fence bar (26 inches to right, 8 inches to left of blade); micro adjustment and auxiliary table support

Steel construction; assembly required

Table saw fence system; saw not included

34 pounds

Making repetitive cuts on your table saw is a pretty straight forward process. Set your fence and feed each stock piece through the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate.

The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence.

Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn’t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it’s essentially just holding its spot once it is secured.

The Thin Rip Jig has a roller guide bearing on the tip to make feeding your stock through an easy and smooth moving process. The free rotating bearing is made from high quality materials for extended workshop use. The jig fits directly into most any standard 3/8” x 3/4” miter slot. The body is made from a solid piece of aluminum and is adjustable inward and outward from your fence depending on the width of your stock.

The jig can be used on other workshop machinery like router tables with fences and band saws for re-saw applications. In certain cases, when working with larger or longer stock on table saws or router tables, we recommend using two thin rip jigs behind the blade or cutter for extra stability when feeding your stock through.

Measures up to 60-inches total length

Simple mounting brackets easily attach to almost any rectangular rail or round rail fence

Large easy to read display reads in inches with fractions or millimeters

Mounts on the left or right side of the fence

Magnetic attachment allows the fence to be removed and maintain calibration

Wide right angle design for maximum accuracy and support

Single locking cam action lever HDPE plastic fence surface for extremely low sliding resistance

Standard rails provide 25-Inch maximum rip to the right of the blade

Fits saws with 27-inch tables

Moves on ball bearing guides

Fine positioning knobs on both sides for left or righ-handed use

Easy installation and locks on both ends

Fits on most major name-brand tablesaws

Table saw fence system fits a variety of saws; 2-1/2-inches fence height

36-inch fence bar (50 inches to right, 8 inches to left of blade); micro adjustment and auxiliary table support

Steel construction; assembly required

Table saw fence system; saw not included

38.4 pounds

Standard 57-inch rails provide 30-inch maximum rip to the right of the blade

Fits most table saws easily

Steel and aluminum fence body for durability, strength, and reduced weight

Easy single locking cam action lever

Wide right angle design for maximum accuracy and support

Sturdy Extruded aluminum construction means it's solid and durable

Provides for straight parallel cuts.

By using the handy adjustable cam, the clamp can adjust from 11-3/8-Inch up to 12-Inch

Arrives fully assembled, right out of the package

Simple, effective cam lever action means device is securely locked in place. Hassle free to store and move about - weighing in at 13.4 ounces

This is an O.E.M. authorized part

Fits various Skill Parts models

OEM Part Number 2610012965

This is a Skil Parts replacement part

Part Number 2610012965

Steel and aluminum fence body; Adjustable fence wear pads; Magnified cursor lens; Easy single locking cam action lever

Long 79-Inch rails provide 50-Inch maximum rip capacity to the right of the blade

Wide right angle design for maximum accuracy and support

Fits most table saws easily